I-Copper kwifom yayo ecocekileyo ayinamandla ngokwaneleyo njengezinye iintsimbi ze-alloy.Ngoko ke i-Copper Nickel Alloy Pipes ibandakanya izinto ezifana nentsimbi kunye ne-manganese yamandla ongezelelweyo.Kukho iiklasi zoxinzelelo ezahlukeneyo zobhedu ezisetyenziswa ekubaleni imfuno yebakala elichanekileyo.IShedyuli ye-40 ye-Nickel Pipes ye-Copper inokumelana noxinzelelo oluncinci ngelixa iShedyuli ye-80 ye-Nickel Pipes ye-Copper inokumelana noxinzelelo oluphezulu.
IiPropati zeMzimba zeCopper Nickel Condenser Tubes
| Ipropati yombhobho we-nickel wobhedu | Metric kwi °C | I-Imperial kwi °F |
| Indawo yokunyibilika | 11,500°C | 21,000°F |
| Indawo yokunyibilika | 11,000°C | 20,100°F |
| Ukuxinana | 8.94 gm/cm³ @ 20°C | 0.323 lb/in³ @ 68°F |
| Ubunzima obuthile | 8.94 | 8.94 |
| I-Coefficient yoKwandiswa kweThermal | 17.1 x 10 -6 / °C (20-300°C) | 9.5 x 10 -5 / °F (68-392°F) |
| I-Themal Conductivity | 40 W/m.°K @ 20°C | 23 BTU/ft³/ft/hr/°F @ 68°F |
| Umthamo weThermal | 380 J/kg.°K @ 20°C | 0.09 BTU/lb/°F @ 68°F |
| Ukuqhuba koMbane | 5.26 microhm?¹.cm?¹ @ 20°C | 9.1% IACS |
| Ukuxhathisa koMbane | 0.190 microhm.cm @ 20°C | 130 ohms (circ mil/ft) @ 68°F |
| Imodyuli yeElasticity | 140 GPA @ 20°C | 20 x 10 6 psi @ 68°F |
| Modulus of Rigidity | 52 GPA @ 20°C | 7.5 x 10 6 psi @ 68°F |
Itshathi yoBume beMichiza yoMbhobho weNikelo yobhedu
| IBanga | Cu | Mn | Pb | Ni | Fe | Zn |
| Cu-Ni 90-10 | 88.6 imiz | 1.00 max | 0.5 ubuninzi | 9-11 ubuninzi | 1.8 ubuninzi | 1.00 max |
| Cu-Ni 70-30 | 65.0 imiz | 1.00 max | 0.5 ubuninzi | 29-33 ubuninzi | 0.4-1.0 | 1.00 max |
Uhlalutyo lomatshini lwe-ASTM B466 yeNickel Tube yobhedu
Ukufumana eyona ASTM B466 Cunifer Cunifer Pipe abavelisi kusetyenziso olubalulekileyo?Uze ungajongi ngokubhekele phaya!Umthengisi ohamba phambili kunye nomthengisi weCunifer Pipe eIndiya
| Isiqalelo | Ukuxinana | Indawo yokunyibilika | Tensile strength | Ukomelela kweSivuno (0.2% i-offset) | Elongation |
| Cupro Nickel 90-10 | 0.323 lb/in3 ngo-68 F | 2260 F | 50000 psi | 90-1000 psi | 30% |
| Cupro Nickel 70-30 | 0.323 lb/in3 ngo-68 F | 2260 F | 50000 psi | 90-1000 psi | 30% |
I-Jiangsu Hangdong Metal Co., Ltd. lishishini lokuphosa kunye nokucubungula ubuchwepheshe obuvelisa ubhedu olusulungekileyo, ubhedu, ubhedu kunye ne-copper-nickel alloy copper-aluminiyam ipleyiti kunye ne-coil, kunye nezixhobo zokuvelisa eziphambili kunye nezixhobo zokuhlola.Inemigca emi-5 yokuvelisa i-aluminium kunye nemigca emi-4 yokuvelisa ubhedu ukuvelisa zonke iintlobo zeplate yethusi eqhelekileyo, ityhubhu yethusi, ibha yobhedu, i-copper strip, ityhubhu yobhedu, ipleyiti ye-aluminium kunye ne-coil, kunye ne-non-standard customization.Inkampani ibonelela nge-10 yezigidi zeetoni zezinto zobhedu unyaka wonke.Imigangatho ephambili yemveliso yile: GB/T, GJB, ASTM, JIS kunye neGerman standard.Qhagamshelana nathi:info6@zt-steel.cn
Ixesha lokuposa: Dec-29-2023
